| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Chisel Rack. What’s It Called? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15110 |
Page 1 of 2 |
| Author: | JackBarton [ Sun Dec 23, 2007 1:04 pm ] |
| Post subject: | |
I know it's a bit random... but pretty soon I'm going to need a practical place to put my chisels as I buy 'em. I really love the old fashioned, "typical" rack. For a pic of what I'm talking about check this: http://pages.friendlycity.net/~krucker/Shop/chisel.jpg I've been looking around and I can't find any plans to make one like that, nor can I find any for sale. Maybe I'm using the wrong search words? So can you guys help me out and tell me if there's an actual name for this style, and where they are available? I would build but I'd rather buy. Cuts down the work load! Happy holidays! |
|
| Author: | Bruce Dickey [ Sun Dec 23, 2007 2:14 pm ] |
| Post subject: | |
Jack, why not go to the lumber yard and buy a one by four? Then take a 1/2 inch spade bit and make a bunch of holes spaced a couple inches apart. I suppose for the big ol' wide chisels you'd have to slot the hole to let the blade pass. Couple of sheetrock screws and maybe a 90 degree 1by2 at the back and screw it to the wall. We have confidence in you. Especially since this was your thirteeth post, this..... is your lucky day! |
|
| Author: | WaddyThomson [ Sun Dec 23, 2007 2:38 pm ] |
| Post subject: | |
I have posted other pictures of this before, but here is my chisel rack.  Then when I want to put it away, it fits in the door of my tool storage cabinet. Like so:  The base slides under a couple of tabs in the corners that keep it from tipping out when you open the door. It is a snug fit, so it will only come out when you slide it out straight. If it is crooked it binds, but it stays and doesn't move around opening and closing doors. |
|
| Author: | FishtownMike [ Sun Dec 23, 2007 3:02 pm ] |
| Post subject: | |
They are called thigamajigs around here. 
|
|
| Author: | TonyFrancis [ Sun Dec 23, 2007 4:24 pm ] |
| Post subject: | |
You must be really tall to reach up for those Lie Nielsens, Todd! |
|
| Author: | Chas Freeborn [ Sun Dec 23, 2007 4:47 pm ] |
| Post subject: | |
I put mine in a drawer (or two or three), but for really wide ranging ideas about shop set ups check out Taunton Press publications (they are the publisher of Fine Woodworking magazine, among others). Great books about all sorts of shop set ups. -C |
|
| Author: | Bob Garrish [ Sun Dec 23, 2007 4:50 pm ] |
| Post subject: | |
My chisel holder is a series of long magnets screwed to my wall. I know a guy who keeps about 100 chisels on his shops double-doors with neodymium magnets, as well. |
|
| Author: | burbank [ Sun Dec 23, 2007 5:13 pm ] |
| Post subject: | |
After consulting my Fine Woodworking collection which goes back to the 70s, I've concluded that it's called a .......... chisel rack! And I keep mine away from the part of the bench where they might accidentally find their way onto a nice soft spruce top. |
|
| Author: | JJ Donohue [ Mon Dec 24, 2007 1:29 am ] |
| Post subject: | |
I hope John Watkins posts on this...he has 97 chisels all neatly housed in several "chisel racks". Truly the "Mother of All Chisel Collections." I, on the other hand, have a modest chisel rack but always seem to have one "go-to" chisel that feels more comfortable and effective that the others...and most of the other 8 chisels collect dust. I also still have a security blanket! 
|
|
| Author: | Bruce Dickey [ Mon Dec 24, 2007 1:35 am ] |
| Post subject: | |
Here is the pic that Jack linked to. I just lay mine on a shelf, and they are always there when I go for 'em. |
|
| Author: | J.R. Hunter [ Mon Dec 24, 2007 2:20 am ] |
| Post subject: | |
[QUOTE=Bruce Dickey] The tenth one from the left... is that a chisel or a burger flipper?! |
|
| Author: | Dave Anderson [ Mon Dec 24, 2007 2:32 am ] |
| Post subject: | |
Those are some very nice chisel racks Waddy,Todd,and Bruce. I really like that tool storage cabinet Waddy! I usually just put mine in my toolbox but I like how handy these racks look. |
|
| Author: | crazymanmichael [ Mon Dec 24, 2007 4:12 am ] |
| Post subject: | |
sometimes we seem to over complicate the obvious and seek a grandiose plan instead of just following our instincts like bruce suggests. does someone else always have to show us what to do. we are supposed to be sentient critters, aren't we? |
|
| Author: | WaddyThomson [ Mon Dec 24, 2007 4:23 am ] |
| Post subject: | |
I made my tool cabinet out of a failed drawer for a cabinet I was putting in my kitchen. It wasn't square, exactly, so wouldn't mount right. I then built a second one matching the not square one, and attached them with hinge, and mounted shelves, chisel racks, file racks, and places to put squares, and a few extra blades. The front has peg board on it. My walls were already full of stuff, floor to ceiling. So it started with an error. |
|
| Author: | Howard Klepper [ Mon Dec 24, 2007 7:07 am ] |
| Post subject: | |
Be careful about putting one row of chisels above another. It's easy to cut yourself on the blades of the upper row when you reach for a handle on the lower row. Todd seems to have them tilted so the blades rest against the back wall and the handles lean forward. That right, Todd? If so, could you show how you get them to sit like that? |
|
| Author: | Doug-Guitar-Buckler [ Mon Dec 24, 2007 7:50 am ] |
| Post subject: | |
I am with JJ, I own 10 or 11 chisels, 2 of them do it all. Its also a lot easier for me to keep just 2 chisels extremely sharp. I keep my chisels in sheaths made from masking tape in a cardboard box. |
|
| Author: | JackBarton [ Mon Dec 24, 2007 7:55 am ] |
| Post subject: | |
Howard, thanks for saving me a couple of potential slices to the hand! :) Crazymanmichael, yes... sometimes it is best to just go for things. But being stranded away from my shop on the holidays kind of prevents that option. Plus, I'd rather have people like Howard share that tip than learn in a more "unfortunate" way. Not everyone is as "sentient" as you are possibly. Cheer up. It's the Holidays!
|
|
| Author: | Hesh [ Mon Dec 24, 2007 10:52 am ] |
| Post subject: | |
I keep my chisels in a drawer NOT collecting dust......  And I only use a few of them too, perhaps 3-4 total.   |
|
| Author: | SteveCourtright [ Mon Dec 24, 2007 12:00 pm ] |
| Post subject: | |
Mine is named Nancy. |
|
| Author: | WaddyThomson [ Mon Dec 24, 2007 2:30 pm ] |
| Post subject: | |
Sony's too short to reach the drawer. Unless Hesh has elevator shoes for him too. 
|
|
| Author: | BOBP [ Tue Dec 25, 2007 3:24 am ] |
| Post subject: | |
Hesh, There Is no dust in your shop.Where do you really build your guitars?
|
|
| Author: | Hesh [ Tue Dec 25, 2007 9:40 am ] |
| Post subject: | |
Filippo buddy: 1) LIFO - last in first out 2) Imitation Tupperware - I am too cheap for the real thing and too honest to not return other people's Tupperware 3) Good idea! Sony is feeling under the weather at the moment from eating the plastic eyes out/off of his Christmas present stuffed Tiger.......... Waddy my friend are you volunteering to build Sony a ramp? Bob buddy it's just easier to vacuum the walls in my shop with the small stuff in drawers...... |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|